PROGRAMME

Venue address: Oulu University, Pentti Kaiteran katu 1, 90590 Oulu, Finland (location on the map)

Wednesday 14.3.2012

9:00-11:00
Opening & Keynote
Chair: Jouko Suokas, VTT

9:00-9:15
Welcome & opening
Harri Kopola and Olli Silven
VTT and University of Oulu

9:15-9:45
KEYNOTE: Connecting Printed And Electronic “Worlds” - DNP Way
Mr Mitsuru Iida, Vice President of Research and Development Center, DNP (Dai Nippon Printing Co., Ltd)

9:45-10:15
KEYNOTE: How to make business out of Printed Intelligence
David Fyfe, David Fyfe Consulting

10:15-10:45
KEYNOTE: Electroceramics - opportunity in printed applications
Heli Jantunen, prof., ERC fellow, University of Oulu

10.45-11:00
PrintoCent Programmes and Pilot Factory introduction
Ilkka Kaisto, Director, PrintoCent / Key Account Manager, VTT

11:00-13:00 Lunch buffet and Company exhibition, Posters, Demo room, PrintoCent Pilot factory tour at University of Oulu premises

Wednesday 14.3.2012 at 13.00 - 17.10 (Parallel sessions)

13:00-14:40
SESSION 1: Materials for Printed Intelligence
Chair: Arto Maaninen, VTT
Saalasti hall

13:00-13:20
Materials Innovation at Xerox
Yiliang Wu, Principal Scientist,  Xerox

13:20-13:40
Specialty Chemistry's approach to printed electronics
Martina Weidner, Head of Altana technology platform "Printed electronics", Altana

13:40-14:00
High Performance Semiconductors for Solution Processable OTFT and OPV
Tomas Backlund, Senior Research Physicist, Merck

14:00-14:20
Ultra-slim flexible glass substrates for continuous device fabrication
Sean Garner, Research Associate, Corning

14:20-14:40
Moisture barrier coatings by ALD – towards industrial roll-to-roll
Mikko Saikkonen, Area Sales Director, Beneq

13:00-14:40
SESSION 2: New Printed Products 1
Chair: Sakari Kauppinen, OUAS
Room TS101

13:00-13:20
Bringing everyday objects and surfaces to life
Jani-Mikael Kuusisto, Chief Business Development Officer, Ynvisible

13:20-13:40
Colored electrochromic materials
Tero Mustonen, Research Scientist, BASF

13:40-14:00
Sustainable Wide Web Brand Promotion and Protection by Hot Embossing
Jaakko Raukola, CEO, Iscent Oy

14:00-14:20
Spektikor - disposable heart beat indicator for rescue personnel
Kari Kivistö, CEO, Spektikor Oy

14:20-14:40
Printed memory roadmap – demonstration of addressable array memory
Per Bröms, Senior Designer, Thinfilm Electronics AB

13:00-14:40
SESSION 3: Open Call Session
Chair: Juha Rantala, Lumichip Ltd.
Room TS128

13:00-13:20
Matching Technology for Roll-to-Roll  Printined Electronics
Kee Hyun Shin, CEO, Toba

13:20-13:30
Accurate Assembly
Lauri Antila, VP Business, JOT Automation

13:30-13:40
High precision narrow web R&D R2R Printing Machine
Markku Känsäkoski, MK Fluidics Oy/Suomen Optomekaniikka Oy

13:40-13:50
Mekoprint printing services
Jacob Bork, R&D Engineer, Mekoprint

13:50-14:00
Nanocomp - Your Partner in Thin Foil Optics
Pekka Savander, VP, NanoComp Oy

14:00-14:10
Point of Sales
Riku Rikkola, Business development specialist, VTT

14:10-14:20
Printed Electronics 2012-2022: Strategies, Forecasts and Trends
Raghu Das, IDTechEx

14:20-14:30
Technology start-up - key steps to growth
Jouko Uusitalo, Business Development Manager, Technopolis

14:30-14:40
IEC TC119 - Born to grow rich together
Kee Hyun Shin, Professor, Konkuk University

14:40-15:10 Short break

15:10-16:30
SESSION 4: Diagnostics
Chair: Markku Känsäkoski, MKFluidics
Room TS101

15:10-15:30
Assessment technology and the aging population: delivering better care!
Peter Curran, Executive VP Operations, Simavita Ltd.

15:30-15:50
Orion Diagnostica on Printed Intelligence
Aino Takala, Vice President, Business Development, Orion Diagnostica

15:50-16:10
Printed electrochemical sensor development platform
Marja Nissinen, PhD, Senior Researcher, Oulu University of Applied Sciences

16:10-16:30
Future opportunities in Point of Care diagnostics
Seppo Mäkinen, Managing Partner, Taikon Advisor Oy

15:10-16:30
SESSION 5: Processes, Machinery & Measurement
Chair: Raimo Korhonen, VTT
Saalasti hall

15:10-15:30
Assembly and production from roll to package
Teijo Fabritius, CEO, Global Innovation Network Oy

15:30-15:50
New innovative technology for measuring surface topography and tomography
Heimo Keränen, Business Development Director, FocalSpec Oy

15:50-16:10
Upscaling from Lab2Fab in Printed Electronics
Thomas Kolbush, VP, Coatema

16:10-16:30
MotionControl for high-end R2R web processing
Andreas Fritzsche, Business Development Manager, Bosch Rexroth

15:10-16:30
SESSION 6: Tech Company Financing and Funding
Chair: Christian Sundell, Business Oulu
Room TS128

15:10-15:30
Wise money for startups: New financing vehicle for innovative startups operating in Oulu area
Ville Heikkinen, Venture Finance and M&A Specialist, Business Oulu

15:30-15:50
How to raise funding - from early stage through growth
Timo Ahopelto, Founding partner, Lifeline Ventures

15:50-16:10
Tekes' new strategy and foreign R&D&I in Finland
Kari Ruutu, Senior Adviser, Tekes

16:10-16:30
Early-stage VC-funding
Finnvera Plc

16:30-18:30
PrintoCent Pilot factory - visit to VTT and Oulu University of Applied Sciences (bus transportation available)

Thursday 15.3.2012

Thursday 15.3.2011 at 9:00-10:20 (Parallel sessions)

09:00-10:20
SESSION 7: Energy Sources and Storage
Chair: Jukka Hast, VTT
Room TS101

9:00-9:20
Where are printed batteries - and their applications?
Risto Huvila, COO, Global Customer Operations, Enfucell

9:20-9:40
Development and Commercialisation of Flexible Organic Solar Modules for Off-Grid Markets
Jurjen Winkel, Principal Scientist, Eight19

9:40-10:00
Eni's activity in OPV
Andrea Bernardi, Researcher, ENI

10:00-10:20
Advancing Low-Cost Photovoltaics
Christoph Sele, Senior Scientist, Solar Press

9:00-10:20
SESSION 8: New Printed products 2
Chair: Ed Van den Kieboom, Innovation Fab
Saalasti hall

9:00-9:20
Opportunities for Flexible and Disposable Electronics
Maurizio Greco, IMS R&D FLAE Industrialization Manager, STMicroelectronics

9:20-9:40
Walki 4E Technology - a new way to produce flexible circuit boards
Mats Holti, VP of Technology, Walki

9:40-10:00
Green manufacturing of flexible and formable carbon based electronics by Direct Dry Printing
David Brown, PhD, CTO / VP Business Development, Canatu Oy

10:00-10:20
Recent progress of flexible display development in AUO
Norio Sugiura, AUO

9:00-10:20
SESSION 9: PrintoCent Programme - info & discussion
Chair: Ilkka Kaisto, VTT
Room: demo room

9:00-10:20
Progr1: to be published at Prinse'12

9:00-10:20
Progr2:  to be published at Prinse'12

9:00-10:20
Progr3:  to be published at Prinse'12

10:20-10:40 Short Break

10:40-11:50
SESSION 10: Keynote & Closing
Chair: Harri Kopola, VTT
Saalasti hall

10:40-11:10
KEYNOTE: Overview of printing technologies at Bosch
Carsten Herweg, Dr., Dept. Leader, Robert Bosch

11:10-11:40
KEYNOTE: The European Horizon for organic and large area electronics
Philippe Reynaert, Project Officer, European Commission, DG Information Society and Media

11:40-11:50
Summary and conclusions
Harri Kopola, VTT

11:50-12:30 Lunch

12:30
Transportation from University of Oulu to Sokos Hotel Arina and Oulu Airport